Description
ABSTRACT
The theme of the research work is production control system software, (A case study of Anammco Nigeria Ltd Emene Enugu, Enugu State.
The objective of this work is to bring it to emphasis on a new system that will help improve production control system software in production companies
The problem encountered during this research work project can be affected at factors. Problem encountered in this research work have been classified into technical and non-technical problem
The major problem encountered during the research work is the problem of inadequate material to provide enough used information about the bill of material used in Anammaco and their defailed analysis.
Also the non technical problem encourtered is the problem of time to necessary of information and acquiring necessary material used in Anammco
All these factors contributed to set back of this research work
Observation and analysis so far made in this research has clearly show that the importance of bill of materials and its study cannot be over emphasized.
Finally, this program will help Anammco in keeping accurate records for their staff. It will also help them to reduce rechdancy in their staff record stored in database.
TABLE OF CONTENTS
i Title page
ii Certification
iii Dedication
iv Acknowledgement
v Abstract
vii Table of contents
CHAPTER ONE
1.0 INTRODUCTION
1.0 Background of the study
1.2 Statement of problem
1.3 Purpose of the study
1.4 Scope of the study
1.5 Significance of the study
1.6 Limitation of the study
1.7 Definition of terms
CHAPTER TWO
REVIEW OF RELATED LITERATURE
2.1 Introduction
2.2 Literature review
CHAPTER THREE
SYSTEM ANALYSIS, METHODOLOGY AND DESIGN
3.1 Introduction
3.2 Methodology
3.3 Analysis of case study
3.3.1 Organizational structure
3.3.2 Sources of data
3.3.3 Procedures in the current system
3.4 Overall data flow diagram (DFD) of the current system
3.5 Files and Record
3.6 Problems associated to the current system
3.7 New system design
3.7.1 System proposal
3.7.2 Proposed system high level model
3.7.3 Design objective
3.7.4 Input/output specification
CHAPTER FOUR
SYSTEM DEVELOPMENT AND IMPLEMENTATION
4.1 Introduction
4.2 Control center/main menu
4.3 Program development
4.3.1 Language selection
4.3.2 Program module
4.3.3 System flow chart
4.3.4 Program flow chart
4.3.5 Program codes/sources program
4.4 Program implementation
4.4.1 Documentation and installation
CHAPTER FIVE
SUMMARY, CONCLUSIONS AND RECOMMENDATIONS
5.1 Introduction
5.2 Summary
5.3 Conclusion
Recommendation