Description
ABSTRACT
Most often, the printing of very important and computer reports have been stopped midway owing to some minor faults on the computer/printer system. At times, due to the complexity of the faults some maintenance find it difficult beginning to perform detailed diagnosis due to lack of specialized equipment, some of which are available only to a few big firms due to their high cost of acquisition.
As the case may be, some of those faults may be such that will require a very fundamental knowledge of printer maintenance, making use of minor tools. Once the actual causes are identified.
This project “EPERT SYSTEM ON TROUBLE – SHOOTING AND MAINTENANCE OF EPSON PRINTER” shooting and maintenance information for non-computer/printer engineers.
INTRODUCTION
The impact of engineering age is tremendous and its arrears of application are increasing geometrically. It is believed that the information revolution will radically change the nature and quality of engineering work in the near future.
Some of the most exiting arrear of the information technology includes.
– Office automation and computer publishing
– Just-in-time (J.I.T) production techniques to reduce cost and improve quality.
– Electronic shopping and electronic funds transfer
– Computer controlled commuter train system
– Decision support system (DSS) that facilitate real time control of making under battle field condition typically characterized by uncertainty
– Computer aids to the handicapped including intelligent implants and experts for medical diagnosis.
– Computer aids instruction (CAI) and aided manufacturing.
Due to all these mentioned arrears of computer application and more, computer has now been accepted and used by so many organizations, by individuals for various purposes. It is believed that computer is an agent, which improves productivity, enhances competition.
It is however worthy to not that 75% of all computer application generate documented information. This is why it is said that had copy is the spice of information.
Computer generates printed report for adequate circulation and communication. This underlines the importance of printers in computerized operations and environments.
Considering the increasing number of which malfunction ‘vis a vis’ while the scanty availability of maintenance experts, these is no doubt that may important and urgent reports are either frustrated permanent or produced too late to serve their purpose. It therefore become very imperative to develop this EPSON printer troubleshooting and maintenance expert system which will guide a non-expert through step by step approach to troubleshoot and maintain his EPSON printer.
TABLE OF CONTENT
Title Page
Certification
Dedication
Acknowledgement
Abstract
Organisation Of The Work (Study)
Table Of Content
Chapter One:
Introduction
1.1 Background Of The Study
1.2 Statement Of Problem
1.3 Purpose Of Study
1.4 Significance Of The Study
1.5 Aim And Objectives
1.6 Scope Or Delimitation
1.7 Limitations Or Constraints
1.8 Assumptions
Chapter Two:
Literature Review
Chapter Three:
Description And Analysis Of Existing System
3.1 Fact Findings Method Used
3.2 Objective Of The Existing System
3.3 Input, Process And Output Analysis
3.4 Information Flow Diagram
3.5 Problems Of The Existing System
3.6 Justification Of The New System
Chapter Four:
Design Of The New System
4.1 Output Specification And Design
4.2 Input Specification And Design
4.3 File Design
4.4 Procedure Chart
4.5 System Flow Char
4.6 System Requirement
Chapter Five:
Implementation
5.1 Program Design
5.2 Program Flow Chart
5.3 Psudocode
5.4 Source Program
5.5 Test Run
Chapter Six:
Documentation
Chapter Seven:
Recommendation And Conclusion
Reference