Description
ABSTRACT
This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.
I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operation, the design and construction procedure.
Critical analysis of all the functional parts of the transformer and rectifier connected to it. It will therefore, be of great in serest and suitable to all electrical engineers and engineering students.
TABLE OF CONTENT
Cover Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1:0:0 Introduction
1:1:0 Objective
1:2:0 Scope of Work
CHAPTER TWO
2:0:0 Literature Review
2:1:0 Description of Transformer
2:2:0 Classification of Transformer
2:3:0 Types of Transformer
2:4:0 Division of Transformer
CHAPTER THREE
3:0:0 Purpose of the Device
3:1:0 Division of Transformer
3:2:0 Uses
3:3:0 Significance of Transformer (Device)
CHAPTER FOUR
4:0:0 Construction of Transformer
4:1:0 Cutting of Lamination
4:2:0 Construction of Former
4:3:0 The Winding
4:4:0 Insulation
4:5:0 Construction of Rectifier
4:6:0 Materials Used
CHAPTER FIVE
5:0:0 Principle of Construction
5:1:0 Major Factor Considered
5:2:0 Rectifier Operations
5:3:0 Components Used
5:4:0 Connection of Transformer to Rectified
CHAPTER SIX
6:0:0 Conclusion
6:1:0 Summary
6:2:0 Problem Encountered
6:3:0 Recommendations
Bill of Quantity